Safety Instructions And Hazard Warnings - TOOLCRAFT ST50-D 50W Bedienungsanleitung

Safety and Hazard Instructions
In case of damage resulting from the non.observance of these
operating instructions, the warranty lapses! We will not assume
any responsibility for consequential damage! We do not accept
any liability for personal injury or damage to property caused by
incorrect handling or non-observance of the safety instructions!
The warranty will lapse in these cases.
This device left the factory in perfect condition in terms of safety engineering.
To maintain this state and ensure safe operation, the user must observe the safety
instructions and warnings contained in these operating instructions.
The following symbols must be observed:
A triangle containing an exclamation mark indicates important infor-
mation in these operating instructions which is to be observed with-
out fail.
The lightening symbol in a triangle warns against an electric shock or
the impairment of the electrical safety of the device.
The "hand" symbol indicates special information and
advice on operation of the appliance.
For safety and certification (CE) reasons, unauthorized modifications and/or chan-
ges to the soldering station are not permitted. Only an expert may replace damaged
power cables.
The soldering station is designed in protective class 2. Make sure the insulation of
the casing is neither damaged nor destroyed.
Electric appliances and accessories should be kept out of the reach of children! It is
not a toy.
20