Inhaltsverzeichnis
Werbung
Charge the battery with a battery charger.
For charging the battery, make sure to use the
charger specially designed for MF battery.
Otherwise, the battery may be overcharged
resulting in shortned service life.
Do not remove the cap during charging.
Position the battery with the cap facing
upward during charging.
After charging the battery, install the battery in the
motorcycle as follows.
When attaching the wiring harness battery
leads to the battery terminals, observe the cor-
rect polarity.
NOTE:
The terminal bolts and nuts are attached to the
battery.
1. First connect the + + + + lead to the + + + + positive terminal
of the battery.
2. Cover + + + + terminal with rubber boot.
3. Connect the - - - - lead to the - - - - negative terminal of
the battery.
4. Install the battery with rubber band.
A: + lead
B: - lead
C: Rubber boot
D: Rubber band
33
Werbung
Inhaltsverzeichnis
