Suzuki RV125K3 Montageanleitung Seite 42

Verify that the master link clip is installed properly.
The opening of the master link clip faces away from
the direction of travel.
A: Direction of travel
B: Master link clip
REAR BRAKE PEDAL
Check the rear brake pedal height.
Rear brake pedal height: 5–15 mm (0.2–0.6 in)
If the rear brake pedal height is not correct, adjust in
the following manner:
1. Loosen the lock nut A.
2. Adjust the brake pedal height by turning the brake
pedal stopper bolt B to locate the pedal to the
correct height below the top face of the footrest C.
3. Tighten the lock nut A.
After the brake pedal height has been adjusted,
check the brake pedal free travel.
Rear brake pedal free travel:
If adjustment is necessary, adjust the free travel by
turning the brake rod adjuster nut D.
TIRE PRESSURE
Using an accurate air gauge, check the air pressure
of the front and rear tires. The pressure should be as
shown.
COLD INFLATION TIRE PRESSURE
SOLO RIDING
125 kPa
FRONT 1.25 kg/cm
18 psi
125 kPa
REAR 1.25 kg/cm
18 psi
41
20–30 mm (0.8–1.2 in)
DUAL RIDING
125 kPa
1.25 kg/cm
18 psi
125 kPa
1.25 kg/cm
18 psi