Connection Of Battery Cables; Connection Of Galvanic Isolation Transformer - Eaton EX RT 7 Installationsaleitung

2. Installation

Connection of battery cables

Connection of galvanic isolation transformer

Transformer Input
Transformer Output
z Output cable cross-section (not provided): 10 mm², solid or stranded wire (maximum 13 mm² or AWG 6).
Input cable cross-section (not provided): 10 mm², solid or stranded wire (maximum 13 mm² or AWG 6).
z
Page 24 - 34007724EN/AD
1 - Check that the battery circuit
breaker is OFF ("0" position),
4 12
2 - Connect the battery power cable
to the connectors
28
29
and battery modules,
3 - Connect the battery detection cable
to the connectors
29
and battery modules,
28
6
12
INPUT
OUTPUT
of the power
6
of the power
4
N
L
N
L