Cleaning And Servicing; Cleaning; Storage; Waste Disposal And Environmental Protection - Parkside 273460 Originalbetriebsanleitung

G B I E

Cleaning and Servicing

Remove the mains plug before car-
rying out any adjustments, mainte-
nance or repair work.
You should have any repair and
maintenance work that is not de-
scribed in these instructions carried
out by our Service Centre. Only use
original parts.
Perform the following cleaning and main-
tenance work regularly. This guarantees
reliable use for a long time.

Cleaning

The device must not be spra-
yed with water or placed in
water. Otherwise there is a
risk of electric shock.
• Keep the safety devices, air vents and
motor housing as free of dust and dirt
as possible. Wipe the device off with
a clean cloth or blow it out with com-
pressed air at a low pressure.
• We recommend that you clean the de-
vice immediately after every use.
• Clean the device regularly with a damp
cloth and some soft soap. Do not use
any detergents or solvents; these might
attack the plastic parts of the device.
Make sure that no water can get into
the interior of the device.
• Oil the moving parts once a month in
order to extend the tool life. Do not oil
the motor.
2 6

Storage

• Store the appliance in a dry place well
out of reach of children..
Waste disposal
and environmental
protection
Take the batteries out of the device and re-
cycle the device, batteries, accessories and
packaging in an environmentally friendly
manner.
Electrical machines do not belong
with domestic waste.
• Dispose of the batteries according to
local standards. Hand in the batteries
at a used battery collection point
where they are recycled in an envi-
ronmentally friendly manner. For more
information, please contact your local
waste management provider or our
service centre.
• Defective units returned to us will be
disposed of for free..