Assembly And Attachment Of Tools And Tool Parts; Safety Instructions For Handling The Laser - Parkside 273460 Originalbetriebsanleitung

G B I E
Warning! During operation, this power
tool produces an electromagnetic field.
Under certain circumstances, this field may
negatively affect active or passive medical
implants. In order to reduce the danger of
serious or fatal injuries, we recommend
that individuals who wear medical im-
plants should consult their doctor and the
manufacturer of the implant before opera-
ting the power tool.
SAFETY INSTRUCTIONS FOR
HANDLING SAW BLADES
1 Only use tools which you know how to
handle.
2 Pay attention to the maximum speed.
The maximum speed stated on the tool
being used must not be exceeded.
Keep within the speed range if one is
specified.
3 Note the direction of rotation of the
motor and saw blade.
4 Circular saw blades with cracks in
them must be taken out of service
(repair is not permitted).
5 Tools with visible cracks must not be
used.
6 Tools must be cleaned regularly.
7 Handle the tools used with care. It is
best to store these in their original pa-
ckaging or special containers. Always
wear protective gloves to improve
your grip and further reduce the risk of
injury.
8 Before using any of the tools, ensure
that all protective devices are correctly
attached.
1 4
9 Before use, ensure that all of the tools
used by you fulfil the technical requi-
rements of this power tool and are
properly attached.
10 The saw blade supplied should only
be used for sawing wood and never
for working metal.
Assembly and Attachment of Tools
and Tool Parts
a) Tools and tool bodies must be tighte-
ned in such a way that they cannot
become loose during operation.
b) Attachment bolts and nuts are to be
tightened to the torques specified by
the manufacturer using appropriate
spanners etc.
c) Extending a spanner or tightening
with the help of hammer blows is not
permitted.
d) The tightening surfaces must be clea-
ned to remove any dirt, grease, oil
and water.
e) Tensioning bolts must be tightened in
accordance with the manufacturer's
instructions.
f) In order to adjust the borehole diame-
ter of circular saw blades to the spind-
le diameter of the machine, only firmly
inserted rings, e.g. rings which have
been pressed into place or which are
held in place by means of an adhesive
bond, may be used. The use of loose
rings is not permitted.
g) Ensure that fixed reducing rings are
positioned parallel to one another.
Safety Instructions for Handling the
Laser
– Caution: Laser radiation - Do not look
into the beam - Laser class 2