Functional Description; Technical Data; Safety Instructions; Symbols And Icons - Parkside 273460 Originalbetriebsanleitung

35 Laser switch
36 Screws for battery compartment
37 Battery cover
38 Attachment points
39 Stop rail

Functional description

The table circular saw is used for cutting all
types of wood lengthwise and crosswise
(only with the transverse stop), depending
on the machine size. All types of round
timbers must not be cut with it.

Technical data

Bench circular saw......................... PTK 2000 B2
AC motor .......................... 230 V ~ 50Hz
Power ................................... 2000 Watt
Operating mode .......................S6 40%*
Safety class .......................................... I
Protection category...........................IP20
Idling speed ...........................4800 min
Carbide saw blade ø 254 x ø 30 x 2,8 mm
Number of teeth ......................... 24 / 48
Thickness riving knife ................... 2,5 mm
min. Workpiece size WxLxH 10x50x1 mm
Table size .........................630 x 445 mm
Table width extender
left/right ..........................620 x 250 mm
Table length extender rear ..435 x 320 mm
Cutting height max. 90° ................ 73 mm
Cutting height max. 45° ................ 63 mm
Height adjustment ................... 0 - 73 mm
Saw blade, swivelling ................... 0 - 45°
Extraction connection ................. ø 34 mm
Weight (including accessories),
......................................approx 29,5 kg
Laser class ........................................... 2
Laser wavelength ........................ 650 nm
Laser power .............................. < 1 mW
Laser module power supply
............................2 x 1,5 V Micro (AAA)
Sound pressure level
(L ) ..................... 92 dB(A); K
pA
Sound power level (L
measured ............105 dB(A); K
guaranteed ......................... 108 dB(A)
* Operating mode S6 40%: Continuous operati-
on with intermittent load (cycle time 10 min). In
order not to heat the motor more than permitted,
the motor may only be operated for 40% of the
cycle time with the stated nominal power and
must then continue running for 60% of the cycle
time without a load.
Technical and optical changes may be
undertaken in the course of further devel-
opment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.

Safety instructions

-1
Ensure that the safety instructions are ob-
served when operating the appliance.

Symbols and icons

Symbols on the appliance:

Carefully read these Operating In-
structions.
Wear eye protection.
Wear ear protection.
Wear breathing protection.
Caution - Risk of injury. Never re-
ach into the running blade.
G B I E
= 3 dB
pA
)
WA
= 3 dB
WA
9