Switching On/Off; Using The Circular Hand Saw; Cleaning And Maintenance; Cleaning - Parkside PHKSA 12 B3 Originalbetriebsanleitung

Switching on/off

Switching on:
1. Press the switch lock (1) to the left or
right and hold it down.
2. Press the ON/OFF switch (2). The LED
work light (16) lights up. Once the ma-
chine has started up, you can release
the switch lock (1).
Switching off:
1. Release the ON/OFF switch (2).
Using the circular hand
saw
1. As described under Switching on and
off, turn on the device and place the
front edge of the baseplate (7) on the
material.
2. Align the machine to the parallel stop
(11) or a drawn line.
Cleaning and

maintenance

Contact our Service Centre about
repairs and servicing not described
in this manual. Only use OEM
parts. Risk of injury!
Turn off the appliance and, before
doing any servicing, remove the
battery.
Perform the following cleaning work regu-
larly. This will guarantee long and reliable
use.

Cleaning

Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
• Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush.
Do not use cleaning agents or solvents.
You may otherwise irreparably dam-
age the appliance.
Maintenance
The appliance cleaner is maintenance free.

Storage

• Store the equipment in a dry place well
out of reach of children.
• The storage temperature for the battery
is between 0 °C and 45 °C. Avoid ex-
treme cold or heat during storage to en-
sure the battery output is not adversely
affected.
Disposal and protection
of the environment
Remove the battery from the device and
recycle the device and packaging in an
environmentally-friendly manner. Instruction
on how to dispose of the rechargeable
battery can be found in the separate inst-
ruction manual.
Machines do not belong with do-
mestic waste.
• Remove the rechargeable battery befo-
re disposing of the device!
GB IE
33