Servicing And Cleaning; Disposal; Service Centre; Declaration Of Conformity / Manufacturer - Parkside PTKS 1800 SE Bedienungs- Und Sicherheitshinweise

j
Keep the push stick
counter key and the operating instructions
10
in the holders in or on the table saw.
j
Always keep the saw blades in a secure
container.

Servicing and cleaning

Q
WARNINg!
Before you carry out any work
on the device always pull the mains plug out of
the mains socket.
J
Wear hand protection when servicing
and cleaning!
j
Never any kind of sharp object or petrol, solvents
or cleaning agents. Do not allow any liquids to
enter the inside of the device.
j
Clean the device after each use.
j
For cleaning, place the machine carefully on its
side.
j
Use a narrow paintbrush to remove sawdust.
You can also blow it away with a compressor.

Disposal

Q
The packaging is wholly composed of
environmentally-friendly materials that can
be disposed of at a local recycling centre.
Do not dispose of electrical power
tools with the household rubbish!
In accordance with European Directive 2002 / 96 / EC,
worn out electrical power tools must be collected
separately and taken for environmentally compatible
recycling.
Contact your local refuse disposal authority for more
details of how to dispose of your worn-out devices.
Information
Q

Service centre

Q
The service centre for your country is shown in the
warranty documentation.
Operation / Servicing and cleaning / Disposal / Information
special spanner
12 11
J Have your device repaired only by
qualified specialist personnel using
original manufacturer parts only. This
will ensure that your device remains safe to use.
J
If the plug or mains lead needs to be
replaced, always have the replace-
ment carried out by the manufacturer
or his service centre. This will ensure that
your device remains safe to use.
Declaration of Conformity /
Q
Manufacturer
We, Kompernaß GmbH, Burgstr. 21,
44867 Bochum, Germany, declare that this
product complies with the following EU directives:
Machinery Directive (98 / 37 / EC):
EN 61029-1, EN 61029-2-1
EU Low Voltage Directive (73 / 23 / EEC),
(93 / 68 / EEC):
EN 61000-3-2, EN 61000-3-3
Electromagnetic compatibility
(89 / 336 / EEC), (92 / 31 / EEC),
(93 / 68 / EEC):
EN 55014-1, EN 55014-2, EN 61000-3-2,
EN 61000-3-3, EN 50366
Description / Model type:
Table saw PTKS 1800 SE
Bochum, 30.04.2008
Hans Kompernaß
- Managing Director -
We reserve the right to make technical modifications in the course
of further development.
GB 15