This section describes the preparations required before commissioning the device. This
includes adjusting the height, the connection of the receiver and the installation of the tele-
phone at a suitable location or the wall-mounting.
Bottom of the Telephone
Fig. 6: Sockets
A
Receiver socket
B
Network cable socket (PoE)
C
PC socket
Preparing the Telephone for Use as Desktop Unit
Requirements
–
The feet of the casing delivered with the telephone
Assemble the feet of the casing in the required position (see
1.
page
Note: The feet can be assembled in three different positions.
Push the feet inward up to the stop.
2.
COMfortel 1200 IP - Setup V03 09/2016
Preparation
C
B
36).
Preparation
A
Fig. 7 on
35