Battery And Charger - Cocraft PRO RT18-PL Bedienungsanleitung

3. For certain applications the saw blade can
be fitted with the teeth facing upwards.
Warning: Make sure that the pendulum
action selector is set to 0 if the blade is fitted
with the teeth facing upwards.
Setting the pendulum action
The adjustable pendulum motion can be adapted to the workpiece material being
sawed. Turn the selector (5) to the desired setting.
• Position 0: Sheet metal, steel, hard plastic or rubber (no pendulum)
• Position I: Non-ferrous metals, hard wood, hard plastic
• Position II: Wood
• Position III: Wood (widest pendulum motion for greatest stock removal)

Battery and charger

Note: Both the battery and charger are sold separately.
The charge indicator on the battery
Note: The indicator only gives a general picture of the battery charge status.
The percentages shown below should therefore only be considered as approximate.
1. Press the button to the right of the battery
indicator to display the current battery
status.
2. At full, 100 % charge, all three LEDs shine.
At 90 % charge, one LED goes out and
two LEDs shine. At 25 % charge, another
LED goes out and only one LED shines.
If none of the LEDs shines, the battery is
completely discharged and needs charging.
Min
BATTERY INDICATOR
9
Max