Troubleshooting Guide - Cocraft PRO RT18-PL Bedienungsanleitung

Troubleshooting guide

The reciprocating
saw won't start.
The reciprocating
saw stops or is
sluggish.
The battery does
not charge.
Responsible disposal
This symbol indicates that this product should not be disposed of
with general household waste. This applies throughout the entire EU.
In order to prevent any harm to the environment or health hazards
caused by incorrect waste disposal, the product must be handed in
for recycling so that the material can be disposed of in a responsible
manner. When recycling your product, take it to your local collection
facility or contact the place of purchase. They will ensure that
the product is disposed of in an environmentally sound manner.
• The battery is discharged. Recharge the battery.
• The overload or overheating protection has been triggered.
Let the reciprocating saw rest and cool for a few seconds
before resuming work.
• Faulty power trigger. Contact our customer services.
• The battery is discharged. Recharge the battery.
• The overload or overheating protection has been triggered.
Let the reciprocating saw rest and cool for a few seconds
before resuming work.
• If the problem remains, make sure that the reciprocating
saw is not overloaded. Reduce the load.
• Is the task suitable for the reciprocating saw?
• Is the charger properly connected to the wall socket?
• Is the wall socket live?
• Is the battery correctly connected to the charger?
• Is the battery defective or too hot/cold? Refer to
the Charging-Charging error indications section above.
13