Care And Maintenance - Cocraft HC1400 Bedienungsanleitung

Vibration
• The measurement of the vibration emission level declared in this instruction manual
has been carried out in accordance with a standardised test method described in
EN 60745 and can be used for comparing one power tool with another.
• The measurement method may also be used for a preliminary assessment of
vibration exposure.
• The declared vibration emission level applies when the power tool is used in accordance
with this instruction manual. If however, the power tool is used for other purposes
and with other accessories or has not been properly maintained, the vibration
emission level could increase significantly over the total working period.
• For an exact assessment of the vibration exposure, the times when the tool is
switched off or running idle should also be taken into account. This significantly
reduces the vibration exposure over the total working period. Decide upon safety
measures to protect the operator from the effects of vibration during all types of use.
Product safety symbols
Read the entire instruction manual.
Always use safety glasses, ear defenders and a face mask.

Care and maintenance

• Check the supply cord regularly. Never use the product if it or the plug appears
damaged.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
• Always unplug the saw before making any adjustments or repairs.
• Clean the product using a lightly moistened cloth. Use only mild cleaning agents,
never solvents or corrosive chemicals.
• Keep the motor ventilation openings free from contaminants.
• If the circular saw is not to be used for an extended period, it should be unplugged
and stored in a dry and dust-free location out of reach of children.
7