Sawing bowed workpieces
When sawing flat workpieces, it is advisable to check if the workpiece is bowed. If it
is bowed, turn it as shown in the figure to prevent it from pinching the blade towards
the end of the cut.
Correct
Care and maintenance
•
Unplug the mains lead from the wall
socket before cleaning and maintenance.
•
Keep the saw clean and free of
sawdust. Keep the ventilation
openings of the motor free of dust and
foreign particles.
•
Remove accumulated sawdust using
a damp cloth. Use only mild cleaning
agents, never solvents or corrosive
chemicals.
•
If the saw is not to be used for
an extended period, it should be
unplugged and stored in a dry and
dust-free location out of reach of
children.
Dust bag
Squeeze together the ends of the spring clip, remove the bag and empty it as required.
Incorrect
11