Product description
1
2
3
4
5
6
1. Safety lock button
2. Power trigger
3. LED work light on/off switch
4. Pendulum motion control
5. Blade holder locking knob
Assembly and setup
Important: Always remove the battery from the power tool before adjusting,
servicing or repairing it.
Changing the saw blade
1. Turn the blade holder locking knob and remove the blade.
2. Insert a new blade and release the blade holder locking knob.
3. Make sure that the blade is correctly fitted.
Switching on and off
Switching on: Hold in the safety lock button and then press the power trigger,
the speed of the blade depends on how hard the trigger is pressed.
Switching off: Release the power trigger.
Adjusting the footplate
The footplate can be tilted up to 45° to the right or left.
1. Undo the two socket head footplate locking screws.
2. Pull the footplate backwards and set the desired angle.
3. Tighten the locking screws to secure the footplate.
7
8
8
10
6. Saw blade guard
7. Saw blade
8. Battery connection
9. Allen key holder
10. Footplate
9