Disassembling The Grease Separator - Kessel NS 4 Anleitung Für Einbau, Bedienung Und Wartung

7.4

Disassembling the grease separator

Arrange for the grease separator to be disassembled e.g. for transport purposes by the manufacturer or
by persons authorised by the manufacturer
• Make sure that the grease separator is completely discharged and cleaned.
• Remove the supply <16> and drainage lines <35>.
• Remove the collection barrels <20, 21, 22> as well as the connected discharge hoses <46, 47, 48>.
• Remove the sludge return pump <34> (option) incl. the respective sludge return line <33>.
• Remove the grease separator ventilation <36> (option).
• If necessary, remove the heating cover <42>. If so, see 7.3.
• Remove the supply connections <29, 37, 43 and 44>.
• The individual components of the sludge trap and the grease separator can be disconnected from each other
at the points fitted with quick-action connectors <15> and screws <14> (see fig. [36]).
16
47
46
21
V 1.0
Maintenance
33 29
20
44
35
37 34 43
73 / 80
48
42
22
fig. [17]