3.2.2
HDPE Panel construction
3.3
Positioning/assembling the grease separator
If the grease separator has to be disassembled ready for transport to its destination, it may be disassembled as
described in Chapter 7.4 .
When full, the grease separator is heavy. Ensure that the base is suitably durable (see "Technical data",
page 65).
•
Position the grease separator on an even and suitably durable surface.
•
Check all screwed and supply connections for a firm fit and tightness.
•
Fit line connections to the supply <16> and drainage <35> lines.
V 1.0
Assembly
53 / 80