Menu Structure - Kessel NS 4 Anleitung Für Einbau, Bedienung Und Wartung

5.1

Menu structure

0 System info
1 Information
Display of the set values; no setting possibility
2 Maintenance
3 Settings
The settings are password-protected (password = 1000).
V 1.0
Settings, operating menu
1.1 Operation hours
1.2 Logbook
1.3 Control type
1.4 Maintenance date
1.5 Curr. meas. values
1.6 Parameter
2.1 Manual operation
2.4 Maintenance date
2.5 Enabling RemoteControl
3.1 Parameter
3.2 Profile memory
3.3 Date/Time
3.4 Number of immersion heaters
3.5 Standard
3.6 Nominal size
3.7 Communication
1.1.1 Total run time
1.1.2 Heating time, total
1.1.3 Heating time, effective
1.1.4 Power outage
1.2.1 most recent event & error
1.2.2 previous event & error
1.2.3 previous event & error
1.2.4 ...
1.4.1 Last maintenance of separator
1.4.2 Next maintenance of separator
1.5.1 Temperature
1.5.2 Rotation
1.6.1 Heating
1.6.2 Mixing
1.6.3 Rinsing
1.6.4 Heating temperature
1.6.30 RemoteControl access
2.1.1 Heating cover
2.1.2 Immersion heater
2.1.3 Mixer
2.1.4 Rinsing motor
2.4.1 Last maintenance of separator
2.4.2 Next maintenance of separator
2.5.1 Enabling duration
2.5.2 Deactivate
3.1.1 Heating
3.1.2 Mixing
3.1.3 Rinsing
3.1.30 RemoteControl access
3.2.1 Save parameters
3.2.2 Load parameters
3.4.1 No immersion heater
3.4.2 1 immersion heater
3.4.3 2 immersion heaters
3.5.1 DIN 4040
3.5.2 Euro standard 1825
3.6.1 NS 2
3.6.2 NS 4
3.6.3 NS 7
3.6.4 NS 10
3.6.5 NS 15
3.6.6 NS 20
3.6.7 NS 25
3.7.1 Station name
3.7.2 Own number
3.7.3 Modem type
3.7.4 PIN
3.7.5 SMS-Center
3.7.6 SMS-Destination1
3.7.7 SMS-Destination2
63 / 80