Kessel NS 4 Anleitung Für Einbau, Bedienung Und Wartung Seite 55

16
27
48
25
• Connect the power supply to the control unit.
• Switch the main switch on, and the initialization begins. While each of the LEDs is lit briefly for approx. 4
seconds, the electrical components are checked and the
procedure can then be carried out.
If the initialization process is not offered in the display (menu
been initialized. In this case, the set parameters must be checked or the factory settings must be restored (see
5.1, Item 3.10, Resetting). After the factory settings are restored, the option to initialize the control unit is of-
fered automatically.
V 1.0
Assembly
41
23
menu is displayed. The initialization
3.8.1. Language
Language), the control unit has already
3.8.1.
55 / 80
35