Analogue Output In Volt - PCE Instruments UA964801 Betriebshandbuch

Alarm 1
Alarm 2
Remote control
113 Signal type
Selects the signal for the analogue output in mA
0 to 20 mA
4 to 20 mA (Default)
114 Lower limit
Analogue output mA lower limit range
-32767 to +32767 [Digit
115 Upper limit
Analogue output mA upper limit range
-32767 to +32767 [Digit
116 Error value
Selects the value of the analogue output in mA in case of error
0 mA (Default)
4 mA
20 mA

11.10 Analogue output in Volt

Parameters to configure the analogue output in Volt
119 Retransmission
Enables analogue output
Disabled (Default)
Process
Alarm 1
Alarm 2
Remote control
] (degrees.tenths for temperature sensors), Default: 0
2
] (degrees.tenths for temperature sensors) Default: 1000
2
User manual - UA964801
93