Safety Instructions; General Information; Intended Usage; Qualified Personnel - Pce Instruments Ua964801 Betriebshandbuch

1

Safety instructions

1.1

General information

To ensure the safe operation of this unit the instructions that appear in this manual
must be strictly observed. In addition, when used all applicable legal and safety
regulations for the respective application must be observed. The same applies
correspondingly to the use of accessories.
1.2

Intended usage

Units from the UA964801 are used for collecting and displaying of a variaty of
analogue sensor signals. Any other use is regarded not in accordance with the
intended usage. The universal graphical panel meters UA964801 are not meant to
be used as sole safety means to prevent dangerous situations on machinery and
installations. Machinery and intallations must be so designed that fault conditions
can not lead to harmful situations to operating personnel (e.g. by independent
limit value switches, mechanical locking etc.).
1.3

Qualified personnel

Units from the Wachendorff universal graphical panel meter UA964801 must only
be operated in accordance with the technical specifications by qualified personnel.
Personnel regarded qualified is familiar with the installation, assembly, putting
into operation and operation of the units and possesses adequate professional
qualification for the task.
1.4

Remaining hazards

Units from the Wachendorff universal graphical panel meter UA964801 are state
of the art and safe to operate. A risk of danger can occur when deployed and
operated improperly by untrained personnel.
In this manual remaining hazards are marked by the following warning symbol:
This symbol indicates that non-observance of the safety guidelines may
cause hazards to persons even serious injury or death and/or the possibility of
property damage.
52
UA964801 - User manual