Product Description And Specifications; Intended Use; Product Features - Bosch EXACT 4 Originalbetriebsanleitung

OBJ_BUCH-529-002.book Page 16 Monday, December 9, 2013 1:37 PM
16 | English
 Use power tools only with specifically designated bat-
tery packs. Use of any other battery packs may create a
risk of injury and fire.
 When battery pack is not in use, keep it away from oth-
er metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
 Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addition-
ally seek medical help. Liquid ejected from the battery
may cause irritation or burns.
Service
 Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained.
Safety Warnings for Industrial Cordless Screw-
drivers
 Hold power tool by insulated gripping surfaces, when
performing an operation where the fastener may con-
tact hidden wiring. Fasteners contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
 Do not drill, fasten or break into existing walls or other
blind areas where electrical wiring may exist. If this sit-
uation is unavoidable, disconnect all fuses or circuit break-
ers feeding this worksite.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Before any work on the machine (e. g., maintenance,
tool change, etc.) as well as during transport and stor-
age, set the rotational direction switch to the centre
position. Unintentional actuation of the On/Off switch can
lead to injuries.
 Hold the machine with a firm grip. High reaction torque
can briefly occur while driving in and loosening screws.
 Use only flawless tool bits that are not worn. Defective
tool bits can break, for example, and cause injury or dam-
age.
 When working with an application tool, pay attention
that the application tool is firmly seated on the tool
holder. When the application tool is not firmly connected
with the tool holder, it can come loose again and not be
controlled.
 Be careful when long screws are screwed in. Depend-
ing on the type of screw and the tool bit used, there is a
danger of slipping. Long screws are often difficult to con-
trol and the danger exists that the tool bit may slip off the
fastener head and cause injury.
 Pay attention to the direction of rotation that is set be-
fore switching on the power tool. For example, when a
screw is to be loosened and the direction of rotation is set
so that the screw is tightened, this can lead to a strong
torque reaction of the power tool.
3 609 929 C61 | (9.12.13)
 Do not use this tool as a drill. Tools equipped with shut-
off clutches are not designed for drilling applications. The
clutch can shut off automatically and without warning.
Battery
 Avoid unintentional switching on. Ensure the On/Off
switch is in the off position before inserting battery
pack. Carrying the power tool with your finger on the
On/Off switch or inserting the battery pack into power
tools that have the switch on invites accidents.
 Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and mois-
ture. Danger of explosion.
 Do not short-circuit the battery. There is danger of explo-
sion.
 Battery leakage may occur under extreme usage or
temperature conditions. When a rechargeable battery
leaks, avoid contact with the skin or eyes. The battery
liquid is caustic and could cause chemical burns to tissues.
If liquid comes in contact with skin, wash quickly with soap
and water, then with lemon juice or vinegar. If the liquid
contacts your eyes, flush them with water for a minimum of
10 minutes and seek medical attention.
 Use only original Bosch batteries with the voltage list-
ed on the nameplate of your product. When using other
batteries, e. g. imitations, reconditioned batteries or other
brands, there is danger of injury as well as property dam-
age through exploding batteries.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.

Intended Use

The power tool is intended for screwing in and loosening
bolts/screws, nuts and other threaded fasteners in the speci-
fied dimension and performance range. This power tool is not
intended for use as a drill; to avoid personal injury or damage
to the tool, do not use any tool with a shut-off clutch for drilling
purposes.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 LED indicator, tightening control
2 LED indicator, battery condition
Bosch Power Tools