Before Initial Use; Fitting The Wall Mounting Bracket - Cleanmaxx Z 02959 Gebrauchsanleitung

EN
Charger and wall mounting bracket (incl. fastening material)

Before Initial Use

CAUTION!
■ Keep children and animals away from the packaging material. There is a danger of
suffocation!
1. Unpack all parts and check the items supplied for completeness (see the "Items Sup-
plied and Device Overview" chapter) and transport damage. If you fi nd any damage
to the components, do not use them (!), but contact the customer service department.
2. If provided remove the transport lock from the On / Off switch.
3. Charge up the battery (see the "Charging up the Battery" chapter).

Fitting the Wall Mounting Bracket

CAUTION!
■ Choose a suitable place for the wall mounting bracket which should be as dry and
close to a plug socket as possible.
■ Make sure that you do not drill into or destroy any pipes or cables. Find out
where possible pipes or cables may run and avoid them.
1. Now hold the wall mounting bracket against the chosen location and mark the drill
holes using a pencil.
2. Then attach the wall mounting bracket to the wall using the associated screws and
dowels.
3. If the barrel connector is not already attached in the wall mounting bracket, plug it into
the holder which is provided for this purpose.
18