General Warranty; Dealer's Warranty; Manufacturer's Guarantee; Of Biketec Ag - Flyer C SERIE Anleitung

Any . kind . of . cracks, . scratches . or . colour .
changes .in .high-stress .areas .are .an .in-
dicator that the service life of the com-
ponent has been exceeded and that it
should .be .replaced.
21. General
warranty
21.1 Dealer's warranty
End customers shall be entitled to exercise the
standard . warranty . claims . against . the . FLYER .
Dealer (depending upon the agreement or appli-
cable .law; .as .a .rule .two .years .after .delivery).
For batteries a residual capacity after two years of
60% .of .the .original .rated .capacity .is .guaranteed, .
provided that the battery has been operated and
charged in accordance with the operating instruc-
tions.
The . wear . and . tear . of . consumable . parts . (e.g. .
tyres, inner tubes, chains, sprockets, brake pads,
paintwork, .labels) .is .not .covered .by .the .warranty. .
The end customer shall be responsible for ensur-
ing .that .the .FLYER .e-bike .is .regularly .maintained .
and cared for (including the conduct of all inspec-
tions .according .to .the .operating .instructions).
Warranty claims shall also be excluded in the
event . that . the . FLYER . e-bike . is . modified . or . re-
paired independently or used other than for its
intended purpose: racing and competition, com-
mercial usage, overloading and other use that
does .not .reflect .the .intended .purpose.
21.2 Manufacturer's guarantee
of Biketec AG
a. Warranties
Independently . of . the . warranty . rights . towards .
FLYER .dealers, .Biketec . A G .provides .the .following .
warranty services to the end customer voluntarily
from the date of purchase for new, fully assembled
FLYER .e-bikes .for .which .final .assembly .and .cali-
bration .are .carried .out .by .a .FLYER .dealer .recog-
nised .by .Biketec . A G:
Frame: 10 years for frame failure;
engine, engine control, display, charger: in princi-
ple 5 years for manufacturing defects and faulty
materials; .for .FLYER .e-bikes .from .the ."Mountain" .
segment: 3 years for manufacturing defects and
faulty .materials.
The .warranty .period .for .second-hand .bikes .shall .
commence .from .the .date .on .which .they .were .first .
placed .on .the .market.
b. Processing of warranty claims
During . t he . w arranty . p eriod . B iketec . A G . s hall . c over .
the costs of repair or replacement resulting from
the . product . defects . specified . above, . provided .
that .such .work .is .carried .out .by .a .FLYER .dealer .
recognised .by .Biketec . A G .after .the .FLYER .e-bike .
has been clearly
identified . (sales . receipt, . completed . e-bike . pass .
or . registration . if . applicable). . The . warranty . shall .
remain .valid .in .the .event .of .sale .to .a .third .party.
Biketec .AG . reserves . the . right . to . supply . or . con-
struct . functionally . equivalent . goods . in . the . event .
of . the . exchange . of . a . FLYER . or . of . components .
under .warranty.
Claims made under this warranty do not extend
the .original .period. .The .same .restrictions .on .the .
warranty .as .set .forth .in .clause .1 .shall .apply.
22. Inspection plan
After . the . first . 200 . ridden . kilometres . or . after . 4 .
months:
FLYER specialist retailer
• Check .the .firm .attachment .of .all .screws, .nuts .
and .quick-release .fasteners
• Check the wheels and centre them as
required
• Check the tyres
• Check .the .fastening .torque .on .all .parts
• Adjust .the .headset
• Check the brake lines and shifter cables
• Check .the .gear .system .and .adjust .if .neces-
sary
• Check .the .brakes .and .adjust .if .necessary
• Sufficient .lubrication .of .all .components
• Check .the .suspension .elements .and .adjust .if .
necessary
FLYER rider
During .your .e-bike's .first .inspection .by .the .FLYER .
specialist retailer, ask them to explain the correct
processes for cleaning and oiling the chain after
rain and checking components for function or dam-
age.
Before each ride – FLYER rider
• Check the correct position of the bell
• Check the function of the brakes
• Check the function of the gear system
• Are .all .quick-release .fasteners, .quick-release .
axles, screws and nuts completely closed and
fastened?
• Check that the tyre pressure is correct
• Check the wheels for true running and dam-
age as well as safe attachment and correct
fastening
• Check that the handlebars, stem, seat post
59
EN