Before Use; Starting The Charging Process - Parkside PAT 4 B2 Originalbetriebsanleitung

to the instructions provided for cleaning, main-
tenance and repair.
7. The charger is suitable for indoor use
only.

Before use

Note: Remove all packaging materials from the product.
Note: The rechargeable battery comes partly charged. Charge the
battery prior to first use, ideally at least 3–5 hours. Li-Ion batteries may
be charged at any time without reducing their life. Interrupting the
charging process does not damage the rechargeable battery.
This product is equipped with a depth discharge protection which
prevents discharging below final discharging voltage.
Do not continuously pull the trigger
built-in rechargeable battery.
Set the On / Off switch
be used or will be stored for extended periods.
Note: If the charge indicator
is below 30 % and the battery must be recharged.

Starting the charging process

Connect the USB cable
Connect the other end of the USB cable
charging socket
Connect the charger
source. The charge indicator
will light up red whilst charging. Once the battery is fully charged
it lights up green.
16 GB/CY
1
to the "0" position if the product will not
8
lights up red during use, the charge
9
to the charger
7a
on the product.
2
to a 100–240 V∼ 50 / 60 Hz power
7
shows the charging progress. It
9
to prevent damaging the
using the USB socket.
7
to the micro-USB
7a