RESIDUAL RISKS!
■
Even if the appliance is used as prescribed, it
is impossible to completely eliminate a certain
residual risk. The following hazards may
occur during use and the user should pay
particular attention to the following points:
■
Injuries caused by vibrations
–
Always use the right tool for the task; use
the handles provided and limit working
time and exposure.
■
Contact with blades
–
Ensure that the transport protection is
fitted when the product is not in use.
Always keep your hands and feet away
from the cutting tools.
■
Injuries caused by ejected parts of the work-
piece (wood chips and splinters)
Safety guidelines for battery chargers
This appliance may be used by chil-
■
dren aged 8 years and above and
by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks. Do not allow
children to use the appliance as a
toy. Cleaning and user maintenance
tasks may not be carried out by chil-
dren unless they are supervised.
The charger is suitable for in-
door use only.
To avoid potential risks, damaged
■
mains cables should be replaced
by the manufacturer, their customer
service department or a similarly
qualified person.
PALA 20-Li A1
WARNING!
■
Do not operate the appliance with a
damaged cable, power cord or mains plug.
Damaged power cords can result in danger
to life due to electric shock.
Original accessories/auxiliary
equipment
■
Use only the additional equipment and acces-
sories specified in the operating instructions.
Using attachments or accessory tools other than
those recommended in the operating instruc-
tions can lead to a risk of injury.
Before use
Charging the battery pack (see fig. A)
CAUTION!
►
Always unplug the appliance before you re-
move the battery pack
battery pack to the high-speed charger
■
Never charge the battery pack
ambient temperature is below 10°C or above
40°C.
♦
Insert the battery pack
charger
.
♦
Insert the power plug into the socket. The control
LED
lights up red.
♦
The green LED
indicates that the charging
process is complete and the battery pack
ready.
from or connect the
.
when the
into the high-speed
is
GB │ IE │ NI
│
9
■