Safety Instructions Specifically For Impact Screwdrivers; Safety Guidelines For Battery Chargers; Original Accessories/Auxiliary Equipment; Before Use - Parkside PASSK 20-Li A1 Originalbetriebsanleitung

Safety instructions specifically for
impact screwdrivers
■ Wear hearing protection when impact
screwing. Exposure to loud noise can lead
to hearing loss .
■ Secure the workpiece! A workpiece securely
held by a clamping device or vice is much safer
than one held in your hand .
■ Hold the power tool firmly. High torques can
occur for brief periods while tightening and
loosening screws .
■ Wait until the power tool has come to a stand-
still before putting it down. The tool can jam,
this leading to loss of control of the power tool .
■ Hold the power tool by the insulated gripping
surfaces, when performing an operation where
the screw could come into contact with hidden
wiring. Contact between the screw or attached
tool and a live wire may cause exposed metal
parts of the power tool to become live and give
the operator an electric shock .

Safety guidelines for battery chargers

This appliance may be used by
■
children aged 8 years and above
and by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks . Do not allow
children to use the appliance as a
toy . Cleaning and user maintenance
tasks must not be carried out by
children unless they are supervised .
The charger is suitable for indoor use only .
■ 18 │ GB │ IE
ATTENTION!
♦ This charger can only charge the following
batteries: PAP 20 A1/PAP 20 A2/PAP 20 A3 .
♦ A current list of battery compatibility can be
found at www .lidl .de/Akku .
WARNING!
■ To avoid potential risks, damaged mains
cables should be replaced by the manufac-
turer, their customer service department or a
similarly qualified person .
Original accessories/auxiliary
equipment
Use only accessories and auxiliary equipment
specified in the operating instructions and which
are compatible with the appliance.
WARNING!
■ Do not use any accessories which are not
recommended by PARKSIDE . This can lead to
an electric shock and fire .
ATTENTION!
Hot surface .
There is a risk of burns .

Before use

Charging the battery pack (see fig . A)

CAUTION!
► Always pull out the power plug before you
remove the battery pack from or connect the
battery pack to the charger .
NOTE
► Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C .
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly . The optimum charge level
is between 50% and 80% . The storage cli-
mate should be cool and dry and the ambi-
ent temperature should be between 0°C and
50°C .
PASSK 20-Li A1