Fronius 10.0-1 Serviceanleitung Seite 125

Installing the DC Disconnector:
(3) (3)
(1)(2)
Insert the new DC disconnector and
1
mount with 4 screws 4x9 TX20
(3)[2 Nm]
(3)
Insert the shift knob with shaft (2) and
3
fix with holder (1)
WARNING! Take safety precau-
tions. Due to DC voltage, follow
safety rules!
Connect AC and DC lines from the ter-
4
minal block of the DC disconnector
Insert the inverter into the wall bracket
5
(see "Opening and Closing Device"
section)
125