(2)
(2)
(3)
(1)
Thread in the fan cable and press in
3
the cable seal (3)
Position the fan cable through both
4
strain-relief devices
Put 2 rubber seals (2) in place
5
WARNING! The cable seal must
be completely inserted in order to
ensure leak-tightness
NOTE! Carefully turn the inverter.
Place fan cable (1) on the PrimoFIL
5
Close the inverter and insert into the
6
wall bracket (see "Opening and Clo-
sing Device" section)
After commissioning the inverter, carry out
a fan test via the display (see operating in-
structions)
133