Fronius 10.0-1 Serviceanleitung Seite 143

(1) (2) (1)
Thread in and mount all cable and plug
4
connections (1-2)
(3)
Mount the PrimoPS AC with 11 screws
5
4x9 TX20 (3)
[2 Nm]
NOTE! Ensure that the ferrite core
and its bracket are properly
mounted
Close the inverter and insert into the
6
wall bracket (see "Opening and Clo-
sing Device" section)
After commissioning the inverter, carry out
a fan test via the display (see operating in-
structions)
143