Gastroback 42720 Design Coffee Grind & Brew Advanced Pro Bedienungsanleitung Seite 85

Problem
Total brewing time on LCD screen
changes mid-cycle or is different
each time.
'CLEAN COFFEE CHUTE' on LCD
screen.
Coffee brewer beeps and displays
'1' on the LCD screen.
Coffee brewer beeps in fast successi-
on and '2' or '4' is displayed on the
LCD screen.
Possible Reason
The total brewing time displayed at
the start of the cycle is an estimate
only and may change mid-cycle or
vary each time depending on the
starting temperature of the water in
the water tank.
Grinding burrs and coffee grinds chu-
te need to be cleaned.
There is a problem with the coffee
grinds chute disc.
The Solution
• We strongly recommend doing this
immediately to avoid clogging and
overflowing of the coffee basket.
See: ›Cleaning the Burrs and Coffee
Grinds Chute‹. Thereafter, thorough-
ly clean the coffee basket and gold
tone filter to ensure they are clear
and unclogged of any coffee grinds.
• Check the bean hopper for any
foreign object.
• Check the coffee grinds chute disc
for any build-up of coffee grinds.
This is the stainless steel disc that
is visible when the swing-out door
is opened. A build-up of grinds on
this disc can affect the performance
of the coffee brewer. Wipe the disc
clean then dry thoroughly. If the
problem persists, call an authorized
Service Centre.
• Unplug the appliance from power
outlet, wait 10 seconds, and plug
back in to turn on.
• Unplug the unit from power outlet
and wait an hour before plugging
the unit into the power outlet again.
If the problem persists, contact an
authorised service centre.
85