John Bean B 300 Betriebsanleitung Seite 74

1
2
3
4
74
5
5-32
Operation
Option 2: Do not readjust the tyre on the rim
Press the STOP key (5) to exit the minimisation
•
program and return to the balancing program
The imbalance on the wheel is shown on the readout.
Balance the wheel according to the readings.
•
Reading H0
The optimum minimisation condition has been
achieved and cannot be improved.
Press the STOP key (5) to return to the balancing
•
program and continue according to the readings.
...