Remaining Risks; Technical Data; Before Starting Up - Scheppach Csp4000 Originalbetriebsanleitung

tree with a top cut. They may fall into the saw or trap
it if you use an undercut.
Pruning (Fig. K)
m CAUTION
Prune branches only at or below shoulder height.
Never cut branches above shoulder height. Leave
that kind of work to a professional.
• For the first cut (Pos. 1), cut 1/3 of the way into the
lower part of the branch.
• Then cut all the way through the branch with the
second cut (Pos. 2). The third cut (Pos. 3) is a top
cut with which you separate the branch from the
trunk at a distance of 2.5 to 5cm.

5.8 Remaining risks

m DANGER
RISK OF INJURY !
Contact with the saw-chain can lead to fatal cutting
injuries.
Never put your hands into the running saw-chain.
RISK OF KICKBACK!
Kickback can lead to fatal cutting injuries.
RISK OF BURNING!
The chain and the guide bar heat up during opera-
tion.
Behaviour during an emergency
Start First Aid measures relevant to the injury and re-
quest medical help as quickly as possible. Prevent
the injured person from further injury and keep him/
her rested. For potentially occurring accidents, the
First Aid kit, according to DIN 13164, should always
be handy at the work place. Material taken from the
First Aid kit must be replaced immediately. When you
are requesting help, give the following information:
1. Location of accident
2. Type of accident
3. Number of injured people
4. Type of injuries
Store all safety notices and instructions for the fu-
ture.

6. Technical data

Machine length x width x
height
Weight without bar and
chain
Weight with bar and chain
Cutting Length
Bar Length
Automatic chain oiling
Chain Oil
36 І 64
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
425 x 250 x 280 mm
5,0 kg
5,6 kg
360 mm
400 mm
yes
Specialist Chain Oil
Chain oil tank capacity
Chain Division
Chain Thickness
Chain Type
Chain Brake
Bar Type
Chain Speed Max
Motor
Engine Capacity
Maximum Motor Capacity
Idle Speed
Maximum Speed with Cut-
ting Attachment
Fuel Tank Capacity
Fuel Type
Keep the noise emissions and vibrations to a
minimum.
• Only use appliances which are in perfect work-
ing order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.
Sound Pressure Level L
pA
Uncertainty K
pA
Sound Power Level L
WA
Vibration Front Handle
Vibration Rear Handle
Uncertainty

7. Before starting up

m CAUTION!: Start the engine only when the saw is
fully assembled.
m CAUTION!: When handling the chain always wear
protective gloves.
Assembling the bar, and the chain
0,16 l
3/8"
1,27 mm
Oregon 91P056X
yes
Oregon
160DEA041
24 m/s
2 stroke, air-cooled
40 cm³
1,5 kW
3000±400 min
-1
12500 min
-1
0,22 l
Mix 40:1
102 dB(A)
3 dB
115 dB(A)
5,01 m/s²
4,43 m/s²
1,5 m/s²