Service; Guarantee - Parkside Pgkga 40-Li B2 Originalbetriebsanleitung

Problem
Safety cutter bar
(11) becomes hot.
Saw chain gets hot,
smoke develop-
ment when sawing,
discolouration of
the rail

Service

Guarantee

Dear Customer,
This product is provided with a 3 year
guarantee from the date of pur-
chase. In case of defects, you have
statutory rights against the seller of
the product. These statutory rights
are not restricted by our guarantee
presented below.
Terms of Guarantee
The guarantee period begins on the
date of purchase. Please retain the
original receipt. This document is re-
quired as proof of purchase. If a ma-
terial or manufacturing defect occurs
within three years of the date of pur-
chase of this product, we will repair or
replace – at our choice – the product
for you free of charge. This guaran-
tee requires the defective product
and proof of purchase to be presen-
ted within the three-year period with a
brief written description of what con-
stitutes the defect and when it oc-
curred.
Possible Cause
Safety cutter bar (11)
blunt
Nicks on safety cutter
bar (11).
Too much friction due to
lack of lubrication
Not enough chain oil
Remedy
Have the safety cutter bar
sharpened or replaced (service
centre)
Have the safety cutter bar
sharpened or replaced (service
centre)
Lubricate the safety cutter bar
(11)
• Checking the oil
automation, p. 22
• Pouring in chain oil,
p. 21
• Contact the service centre.
If the defect is covered by our guar-
antee, you will receive either the re-
paired product or a new product. No
new guarantee period begins on re-
pair or replacement of the product.
Guarantee Period and Statutory
Claims for Defects
The guarantee period is not exten-
ded by the guarantee service. This
also applies for replaced or repaired
parts. Any damages and defects
already present at the time of pur-
chase must be reported immediately
after unpacking. Repairs arising after
expiry of the guarantee period are
chargeable.
Guarantee Cover
The product has been carefully pro-
duced in accordance with strict qual-
ity guidelines and conscientiously
checked prior to delivery.
The guarantee applies for all mater-
ial and manufacturing defects. This
guarantee does not extend to cover
product parts that are subject to nor-
mal wear and may therefore be con-
sidered as wearing parts (e.g. Blade
GB CY
35