Transmitting Phone Numbers From The Pbx Telephone Book - Auerswald COMfortel DECT 900 Installation Und Konfiguration

Basic Settings

Transmitting Phone Numbers from the PBX Telephone Book

Important:
Programming functions that were manually entered in the telephone by using the
menu or modified directly on the telephone will be overwritten during a PBX synchro-
nization process.
Transmitting Phone Numbers from the PBX Telephone Book
You can use the PC program COMtools Telephone book or the PBX configuration manager to trans-
mit short-code dial number from the PBX to the handsets:
• COMpact 2204/2206/4410 USB, COMpact 4406 DSL, COMmander Basic, COMmander
Basic 19": up to 80 short-code dial numbers
• COMpact-3000 series, COMpact 5010/5020 VoIP, COMmander Basic.2, COMmander
Basic.2 19", COMmander Business, and COMmander Business 19": COMfortel DECT 900 up
to 140 phone book entries, COMfortel DECT 900C up to 250 phone book entries
Note: Phone numbers that were manually entered in the handset will not be
overwritten by COMtools or configuration manager entries. That means that those
phone numbers can be modified or deleted only manually. The available number will
be displayed unter Free for short-code dialling number in the COMstools
Telephone book and under Free entries in the configuration manager.
Requirements:
– Base station connected to PBX
– COMpact 2204/2206/4410 USB, COMpact 4406 DSL, COMmander Basic, COMmander
Basic 19": PBX was configured using the COMtools PC program
– COMpact-3000 series, COMpact 5010/5020 VoIP, COMmander Basic.2, COMmander
Basic.2 19", COMmander Business, and COMmander Business 19": Configuration manager,
opened with a sufficient authorization level
1. Open one of the following pages:
76