Deregistering Handsets; Deregistering Handsets Using The Pbx Configuration - Auerswald COMfortel DECT 900 Installation Und Konfiguration

Further steps:
– Register the handsets at the base station (see
tion on page 57)
– COMpact 2204/2206/4410 USB, COMpact 4406 DSL, COMmander Basic, COMmander
Basic 19": Write the configuration back to the PBX (File ... Save ... PBX).
– COMpact-3000 series, COMpact 5010/5020 VoIP, COMmander Basic.2, COMmander
Basic.2 19", COMmander Business, and COMmander Business 19": Save your settings before
you leave the page.
Note for the COMset configuration program:The field with the manually entered
identification number remains highlighted in blue for as long as it takes to register the
handset correctly at the base station (see
Base Station

Deregistering Handsets

You can deregister handsets by configuring the PBX or directly at one of the handsets.

Deregistering Handsets Using the PBX Configuration

Requirements:
– COMpact 2204/2206/4410 USB, COMpact 4406 DSL, COMmander Basic, COMmander
Basic 19": PBX was configured using the COMset configuration program
– COMpact-3000 series, COMpact 5010/5020 VoIP, COMmander Basic.2, COMmander
Basic.2 19", COMmander Business, and COMmander Business 19": Configuration manager,
opened with a sufficient authorization level
– Telephone number assigned to the handset
1. Open one of the following pages:
• COMpact 2204/2206/4410 USB, COMpact 4406 DSL, COMmander Basic, COMmander
Basic 19": COMfortel DECT > scr -> handsets
• COMpact-3000 series: CONFIGURATION > Internal number > ISDN subscribers (S0
internal) and then DECT settings and DECT subscriber
on page 57) and to re-read the configuration.
Commissioning the System
chapter Registering Handsets with the Base Sta-
chapter Registering Handsets with the
Deregistering Handsets
61