Configuring The Settings At The Pbx - Auerswald COMfortel DECT 900 Installation Und Konfiguration

Commissioning the System
Setting up the SMS Functionality
– Handset has Exchange line authorization enabled for external calls (
– Desired SMS centres are entered into handset
– Handset registered with all desired SMS centres
– One of the desired SMS centres is entered in base station
Further requirements for COMpact 2204/2206/4410 USB, COMpact 4406 DSL, COMmander Basic,
COMmander Basic 19":
– Exclusive telephone number configured for SMS transmission and receipt for each handset
– All desired SMS centres are entered in PBX

Configuring the Settings at the PBX

For COMpact 2204/2206/4410 USB, COMpact 4406 DSL, COMmander Basic or COMmander
Basic 19" PBXs, the transmission and receipt of SMS messages needs to be configured within the
PBX configuration.
Setting up Telephone Numbers for SMS Transmission and Receipt
These settings allow the handset to receive SMS messages through an exclusive telephone number.
This telephone number is transmitted when sending SMS messages.
1. To send and receive SMS messages, you need to disable the normal call distribution for each
telephone number (see
2. To send and receive SMS messages, you need to enable SMS call distribution for each
telephone number (see
Abb. 14: Call distribution
70
Abb. 14).
Abb. 15).
Abb. 15: SMS call distribution
international
)