Basic Settings; Setting Up The Function Key For Pbx Functions - Auerswald COMfortel DECT 900 Installation Und Konfiguration

Basic Settings

Setting up the Function Key for PBX Functions

Basic Settings
Setting up the Function Key for PBX Functions
The key can be assigned to up to ten programming functions on the PBX.
Requirements:
– COMpact 2204/2206/4410 USB, COMpact 4406 DSL, COMmander Basic, COMmander
Basic 19": PBX was configured using the PC program COMtools Telephone book
– COMpact-3000 series, COMpact 5010/5020 VoIP, COMmander Basic.2, COMmander
Basic.2 19", COMmander Business, and COMmander Business 19": Configuration manager,
opened with a sufficient authorization level
1. Open one of the following pages:
• COMpact 2204/2206/4410 USB, COMpact 4406 DSL, COMmander Basic, COMmander
Basic 19": Subscriber > [name or telephone number of the handset]
• COMpact-3000 series: CONFIGURATION> Internal number > ISDN subscribers (S0
internal) and then DECT settings and DECT subscriber
• COMpact 5010/5020 VoIP, COMmander Basic.2, COMmander Basic.2 19", COMmander
Business, COMmander Business 19": COMset > Internal numbers > Subscriber (scr.)
> COMfortel DECT > Program function key
2. Enter the desired programming functions:
• COMpact 2204/2206/4410 USB, COMpact 4406 DSL, COMmander Basic, COMmander
Basic 19": in the Exchange line number input fields for Short-code dial number 8200 -
8209
The following entries are possible:
Up to 20 digits
0 9
- : Dial number 0-9
#
The and
P
: Inserts a dialling pause of three seconds.
R
: Inserts a flash signal.
• COMpact-3000 series: in the Programming function input fields under Function key
assignment
74
*
characters: dial characters # and *