schmalz 3D-R Schnellstartanleitung Seite 16

4. Attach the "bumper" to the ECBPi via the attach-
ment tabs.
5. Fit the flange extension (connection between suc-
tion cup & ECBPi) to the ECBPi.
6. Select the suction cup using the selection aid
(chapter 5.3) and attach it.
7. Using four M6x30 screws, attach the flange
adapter and camera holder to the robot arm in the
correct position (Poka Yoke dowel pin 6x40).
16 / 36
Attachment tabs
1
EN-US · 30.30.01.02422 · 00 · 06/20
3
2
4