Switching The Welding Process On/Off - Abicor Binzel Rtm Abix Easyteach Originalbetriebsanleitung

RTM ABIx EasyTeach

7.5 Switching the welding process on/off

If welding is activated, the next movement will be a MoveP movement with process speed. If welding is
deactivated, the next movement will be an axis movement.
Operation via operating panel
Fig. 11
To start the welding process, press the <weld on/off> button.
1
To stop the welding process, press the <weld on/off> button again.
2
Operation via the multifunction flange
Switching the welding process on/off
To start the welding process, briefly press the <welding functions>
1
button on the multifunction flange.
To stop the welding process, briefly press again the <welding
2
functions> button on the multifunction flange.
7 Creating a welding program
DE - 11