Product Description; Assembly And Use - Abicor Binzel Rtm Abix Easyteach Originalbetriebsanleitung

3 Product description

3 Product description

3.1 Assembly and use

Fig. 1
A Connecting cable
B Torch mount
C <Welding functions> button
F
E
D
C
With the multifunction flange <RTM ABIx EasyTeach>, the robot can be directly programmed via buttons,
without the need to use the operating panel.
The welding process can be executed via the multifunction flange in order to fix workpieces with a welding
tack.
<Robot movement release> button (E)
<Movement programming> button (D)
<Welding functions> button (C)
The "easyTeach" software extension is automatically installed with the URCap from version 4.0.0.
 "Installing and using URCap" instruction leaflet
DE - 4
Assembly and use
RTM ABIx EasyTeach
D <Movement programming> button
E <Robot movement release> button
F Mounting flange
A
B
This button is used to release the robot for manual
movement.
This button is used to program movements
(positions, circle movements).
This button has two functions:
— Programming the welding process
— Creating a welding tack