Playing Tracks In A Different Order (Program Play) - Sony MDS-DRE1 Bedienungsanleitung

Playing Tracks in a Different Order (Program Play)

This function lets you playback tracks in any order by
creating programs containing up to 25 tracks.
EDIT/NO
ENTER/YES
PLAY/PAUSE
1
During stop, press EDIT/NO twice to display "Setup
Menu".
2
Turn AMS to display "Program ?", then press AMS.
"/0/" blinks in the display.
3
Turn AMS to display the number of the track you
want to program, then press AMS.
The selected track number stops blinking and another
"0" appears to indicate that the unit is ready for
another track number.
If you make a mistake
Press 0 or ) repeatedly so that the mistaken track
number blink, turn AMS to change the track number,
then press AMS.
4
Repeat Step 3 to program up to 25 tracks.
"ProgramFull" appears when you enter the 25th track.
Tracks are added in the location of the blinking "0".
The total time of the program is displayed each time
you program a track.
5
When you've finished, press ENTER/YES.
"Complete!!" is displayed and the program is
complete.
6
Press PLAY MODE repeatedly to display
"PROGRAM".
The unit assigns the tracks to the respective pads.
E.g., if your program was "/2 n 8 n 5/":
– Track 2 is assigned to Pad 1
– Track 8 is assigned to Pad 2
– Track 5 is assigned to Pad 3
7
Press PLAY/PAUSE.
The tracks are played in the programmed order.
20 GB
To return to normal playback
Press PLAY MODE repeatedly until "PROGRAM"
disappears.
AMS
z You can also play the program by pressing the pads
Playback starts from the selected track and proceeds in the
PLAY MODE programmed order. If you program more than 8 tracks, use
BANK to switch banks before pressing a pad.
z The program remains available even after you exit the
0/)
Program mode.
Press PLAY MODE repeatedly to display "PROGRAM" again
and you can play the same program.
z When using recordable MDs, the program remains available
even after you eject the MD
With recordable MDs, the program information is written into
TOC data when the disc is ejected. The next time you load the
MD, you can play the same program simply by pressing PLAY
MODE repeatedly to display "PROGRAM".
With commercial MD software, program information is erased
when you eject the disc.
Notes
• The program is erased when a track is edited.
• Cue points cannot be set during Program playback.
Checking the program contents
Press DISPLAY repeatedly while "PROGRAM" is
displayed.
The programmed tracks appear in the order they were
programmed.
For example: "/3 n 5 n 8 n 1 n 2/"