EN
drain water
Special reminder: there is condensing water recycling hidden within this unit.
The condensing water is partly kept recycling between the condenser and the water
plate.
When the water level rises to the upper level, the float switch and water full indicator
(E4) lights on to remind draining water.
Please cut off the power supply, move the appliance to a suitable place, remove the
drain plug, drain water completely. After the drain, re-install the plug, or the appliance
may leak and make your room wet.
If the appliance is placed in a position admitting drain water, you also can connect the
drain hose to the drain port to drain water.
MAINTENANCE
Appliance maintenance
1. Cut off the power supply
Turn off the appliance
first before disconnecting
from power supply.
3. Never use volatile substance such
as gasoline or polishing powder to
clean the appliance.
Air filter maintenance
It is necessary to clean the air filter after using it for about 100 hours.
Clean it as follows:
1. Stop the appliance and remove the
air filter.
3. Clean the air filter every two weeks if the air conditioner operates in an
extremely dusty environment.
2.Wipe with a soft and dry cloth.
Use lukewarm
water(below 40℃
(104℉)to clean if the
appliance is very dirty.
4. Never sprinkle water onto the main
unit.
2.Clean and reinstall the air filter.
If the dirt is conspicuous,
wash it with a solution of
detergent in lukewarm
water. After cleaning, dry it
in a shaded and cool place,
then reinstall it.
11
Use a dry and
soft cloth to
clean it.
Dangerous!
Electric shock!