Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CLEANING AND MAINTENANCE
Map 1
1. Clean the air filter screen (map 1)
- Turn off and unplug the appliance.
- Unscrew the top edge of the air filter screen.
- Pull the air filter screen handle to remove it.
- Clean the neutral detergent and a soft brush, then rinse with clear water.
- Reinstall the air filter screen and screw it back in place.
2. Clean the wetted pad (map 2 and map 3)
- Turn off and unplug the appliance.
- Unscrew the top edge of the air filter screen and remove it.
- Unlock and remove the wetted pad and its support.
- Clean the wetted pad with neutral detergent and a brush, then rinse.
- Reinstall the wetted pad and support, ensuring it is horizontal to prevent leaks.
- Screw the air filter screen back in place.
3. Clean the shell
- Turn off and unplug the appliance due to high pressure inside.
- Wipe with a neutral detergent and soft cloth.
- Avoid leaving water on the control panel.
TROUBLESHOOTING
Malfunction
Appliance does not work
Poor effect of dedusting
Repair the appliance under the following situations:
a. Abnormal action or no action is observed. The previous troubleshooting steps did
not work.
b. Abnormal action caused by ingress of water or foreign objects.
Map 2
Causes
1. The appliance is off or
has a poor connection.
2. 'SPEED' not rotated on
the control panel.
1. Air filter screen is
blocked with dust.
2. Air inlet blocked with
foreign objects.
5
Map 3
Solution
1. Plug in the power cord
and ensure a good
connection.
2. Rotate the 'SPEED' on
the control panel.
1. Clean the air filter
screen.
2. Remove foreign objects
from the air inlet.
Werbung
