Atag HI86471FV Gebrauchsanweisung Seite 208

Settings
Table continued from last page
The following settings are available (depending on the model).
ACL - Auto child lock
Auto child lock
Snd - Sound volume
Sound volume
SEn - Key sensitiveness
Key responsiveness
hth - Hob-to-hood
pairing (Bluetooth)
Hood control
hSt- Hob-to-hood
(Synchro Start Level)
Hood Start Level
hSc- Hob-to-hood
(Synchro Control,
response Level)
Hood response Level
hSP- Hob-to-hood
(Synchro Stop Level)
Hood Stop Level
FIr - Display firmware
version
Firmware version
FoA - Firmware update
over the air
Firmware update via
Wi-Fi
32
5.00 (300, 60 and 20 seconds before end of set time)
While on, the hob is automatically locked at every switch off.
Sound volume has 4 different options. L3 (high), L2 (medium), L1 (low),
off (only error and alarm sounds).
Key responsiveness has 3 different speed options. L3 (quick), L2 (medium),
L1 (slow).
If you own a compatible cooker hood with Bluetooth, you can pair it with
your induction hob! To do this, set this parameter to on. The cooker hood
control icons will start flashing. You now have 5 minutes to activate the
pairing on your cooker hood. Once the cooker hood is paired with your
induction hob, the icons of the cooker hood control will stop flashing.
This setting allows the induction hob to automatically activate the lights of
the connected hood every time the induction hob is turned on.
Depending on the value you set, the ventilation will automatically start at
that speed level when any cooking zone is activated.
This setting allows the induction hob to automatically activate the lights of
the connected hood every time the induction hob is turned on. While on,
the hood will be controled automatically depending on the current highest
activated cooking level. If you manually change any hood related settings,
the hood turns to manual control for the rest of this cooking session.
The response level can be set: L3 (high), L2 (medium), L1 (low), off.
This setting allows the induction hob to automatically deactivate the lights
of the connected hood every time the induction hob is turned off.
Depending on the value you set, the ventilation will switch to that speed
level and stop with a delay.
To display the current software versions of the hob. The UI software version
will be shown .
To receive firmware updates for the cooking hob, you need to be paired
to the cooking hob via the mobile app. You will receive a notification, or
you can check available firmware updates on the mobile app menu for
updates.
To start the firmware update via the app, set this setting to 'on' to confirm
your login to the hob. More information can be found in the 'Wi-Fi' chapter.
After 10 minutes, this setting is automatically set to 'off'.