VEVOR RLC15 3 Bedienungsanleitung Seite 21

4.Disconnect the water box
First, pull the residual pipe out of the water box, and then lift the water box
up vertically to remove the water box.
When disassembling the water box, do not drag the residual pipe at will,
so as not to damage the residual pipe The water box should be emptied
and cleaned every day.
5.Cleaning accessories.
All removed parts should be thoroughly cleaned.
Note: the cleaning method must conform to the current health
standards of the country: where the machine is used.
Please follow the following methods to clean the parts:
•Pour an appropriate amount of neutral cleaning agent into a container of
appropriate size, and then add the appropriate proportion of water to dilute
the cleaning agent.
•Clean the surface of the removed parts with a soft rag glued to a diluted
cleaning agent, and then rinse the parts thoroughly with clean water.
•Pour the right amount of food-grade disinfectant into another container of
the right size, and then add the appropriate proportion of water to dilute it.
•Thoroughly rinse the parts with a cleaning agent and soak them in a
diluted disinfectant for about 30 minutes, then take them out and rinse
- 19 -