Assembly Of Parts - Vevor Rlc15 3 Bedienungsanleitung

cleaning agent.
Wipe the fuselage with a soft wet rag stained with clean water. 3.Dry the
fuselage with a clean dry rag.

Assembly of Parts

All parts that have been cleaned and sterilized must be reinstalled
correctly.
Some parts must be guaranteed to moisturize so that they can be used for
a longer time.
·Assembly of bell mouth sealing ring
·Assembly of stirrer
Put the rear sealing ring of the evaporator into the base of the evaporator,
and then smear Vaseline on the outer surface of the sealing ring behind
the evaporator. Install the assembled stirrer into the evaporator, and the
end of the stirrer limit is inserted into the drive shaft. Then, push the stirrer
forward gently and rotate the stirrer until the stirrer limit head just snaps
into the limit of the drive shaft, and the bell mouth sealing ring can come
into contact with the evaporator.
- 21 -