VEVOR RLC15 3 Bedienungsanleitung Seite 22

thoroughly with clean water.
•Place the disinfected and cleaned parts in a clean place to dry naturally.
6. Clean the evaporator
Wipe the evaporator surface and evaporator base with a soft rag glued
with diluted cleaning agent, then wipe the evaporator surface and
evaporator base 2-3 times with a clean wet dishcloth. Wipe the evaporator
surface and evaporator base several times with a soft rag glued to dilute
disinfectant, leaving the disinfectant on the wiping surface. After half an
hour, wipe the evaporator surface and evaporator base thoroughly with a
clean wet dishcloth.
7.Clean the bucket cover
Wipe the outer surface of the bucket cover with a clean wet rag. Wipe the
bottom surface of the bucket lid several times with a soft dishcloth glued to
dilute disinfectant, leaving the disinfectant on the wiping surface. After half
an hour, wipe the bottom surface of the bucket cover thoroughly with a
clean wet rag, and then dry the bottom surface with a clean dry rag.
8.Clean the fuselage
Wipe the fuselage with a clean soft cloth dampened with the diluted
- 20 -