Note: if you only open the unilateral bucket, you only need to turn on
the corresponding stirring switch, instead of opening two mixing
switches at the same time, which may cause damage to the bucket
without raw materials.
It is forbidden to insert fingers into the machine when it is working,
which may endanger your health.
6. Produce the sherbet
Put the container under the
material outlet, then press the
beater handle, and the slushy
made in the bucket will flow out
automatically.
7.Simple cleaning of material cylinder
A.Release all the materials in the bucket.
B.Turn off the
power.
C.Prepare hot water no more than 50
°C,
then open the lid of the
bucket and pour the hot water into the tank.
D.Tu non the power supply, then press the corresponding stirring
switch and let the stirrer stir for
0.5-1minute.
E.Let out all the hot water in the bucket, and then repeat the operation for more
than 2-4 times.
F.Turn off the stirring switch and the power supply.
Note: please pour clean hot water into the corresponding bucket that needs
to be cleaned, do not exceed the maximum water level make on the bucket, if
you want to thoroughly clean the
machine,
please shut down the
machine.
The starting time should not exceed 2 minutes.
- 14 -