RCB RK29 Originalbetriebsanleitung Seite 57

3. Assemble the pedals
The mark "R" on the pedal shaft is the right
pedal, and the mark "L" is the left pedal.
Right pedal installation method:
The "R" mark on the pedal shaft refers to the right pedal. First, rotate the pedal shaft
clockwise by hand to pre-screw it into the crank with a gear plate on the right, and then
use a No. 15 open-end wrench to rotate clockwise to tighten it.
German /
How to install the left pedal:
The "L" mark on the pedal shaft refers to
the left pedal. First, rotate the pedal shaft
counterclockwise by hand and pre-screw it
into the crank on the left, and then use a
No. 15 open-ended wrench to tighten it
counterclockwise.
(55)
English / French / Spanish / ltalian / Dutch / Poland / Czech
Right pedal
Left pedal